Does the new Fortinet NSE8 dumps exam can be downloaded for? “Fortinet Network Security Expert 8 Written (800)” is the name of Fortinet NSE8 exam dumps which covers all the knowledge points of the real Fortinet exam. Latest Fortinet NSE8 dumps pdf exam youtube training for Fortinet Network Security Expert 8 Written (800). Pass4itsure Fortinet NSE8 dumps exam questions answers are updated (112 Q&As) are verified by experts.
The associated certifications of NSE8 dumps is NSE. No other option is there for you to save the money as well as time and get success in first attempt so don’t waste the time to get the most useful https://www.pass4itsure.com/nse8.html dumps exam preparation software.
Exam Code: NSE8
Exam Name: Fortinet Network Security Expert 8 Written (800)
[New Fortinet NSE8 Dumps PDF From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWVDVZNHEtU3NubGs
[New 70-398 Dumps PDF From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWVTVaMEVIZlpiSDA
Pass4itsure Latest and Most Accurate Fortinet NSE8 Dumps Exam Q&As:
Your customer has requested that during the upcoming 802.llg to 802.11n upgrade deployment you enable 40 MHz channels on 1, 6, and 11 of the 2.4 GHz ISM band. You respond by saying that there is not enough spectrum to allow 40 MHz channels centered on 1, 6, and 11. How wide are standard 802.11g (OFDM) channels?
A. 20 MHz
B. 83.5 MHz
C. 5 MHz
D. 11 MHz
E. 22 MHz
NSE8 exam Answer: A
You have an access point that requires PoE connected to a switch with a 150 meter 10 BASE-T CAT 5 cable. During testing numerous problems with both data transmission and intermittent power occurs. Which of the following is most likely the cause?
A. The cable should be CAT 6
B. There is a duplex mismatch
C. The cable should be 100 BASE-T
D. The cable is too long
Which of the following APs does not support adaptive mode?
NSE8 dumps Answer: A
Which of the following is the primary method of collision avoidance in an 802.11
A. Backoff Timer
B. Carrier Sense
C. Contention Window
D. Enhanced Distributed Channel Access (EDCA)
E. Distributed Coordination Function Interframe Spaces (DIFS)
You are designing a WLAN that will support multiple BSS IDs. One of the characteristics you need to take into consideration is that each BSS transmits a beacon every 100 ms. How many BSSs can be enabled on the following Motorola access points under WiNG 5: AP7131, AP650, AP6532?
A. 2, one per radio
B. 1 per AP, it is shared between the radios to provide seamless roaming
C. 8, four per radio
D. 16, eight per radio
NSE8 pdf Answer: D
You are deploying a new WLAN within the WiNG 5 architecture. Which of the following is the only UNSUPPORTED Motorola access point/port?
Your customer has requested that you configure unique VLANs for voice, normal user data with 802.1X security, guest access, and management traffic. Which of the following VLAN modes can support this request?
A. Native Mode
B. Access Mode
C. Trunk Mode
D. Aggregation Mode
E. Encapsulation Mode
NSE8 vce Answer: C
Which of the following statements regarding the configuration of Motorola RFS controllers is TRUE?
A. ADSP can be used to push CLI profiles to APs and controllers.
B. LANPlanner can be used to push CLI profiles to APs and controllers.
C. RFMS can be used to perform predictive site surveys using an RFS controller
D. WiNG 5 can be used to perform manual site surveys using an RFs controller
E. CLI can be used to perform both manual and predictive site surveys using an RFS
You have configured a Motorola RFS controller using WiNG 5 and have attempted to adopt a group of APs using L2 adoption but the adoption is not successful. You have confirmed the following:
– All of the APs have an Ethernet connection to the same LAN segment as the controller
– Spanning Tree Protocol (STP) has been disabled on the APs next hop switch port
– Intermediate firewalls are not blocking EtherType 0x8783
Given this scenario, which of the following is the most likely cause of the unsuccessful AP adoption?
A. DHCP option 192 has not been defined on the DHCP server
B. A local VLAN has been configured on both the controller and the APs
C. The APs GE ports have been configured for an S02.1q-tagged native VLAN
D. The APs GE ports have been configured for an 802.1q-untagged native VLAN
NSE8 exam Answer: C
Which of the following are methods that may be used to perform the initial configuration of an RFS controller using WiNG 5 (select THREE)?
A. Static configuration using SNMP
B. Automated self-configuration using Smart RF
C. Manual configuration using GUI
D. Manual configuration using CLI
E. Manual configuration using RFS Activator application
F. Automated configuration using wizard
Answer: C, D, F
You are deploying a new WiNG 5 WLAN system and the client will have several different types of access points, Independent AP licenses within WiNG 5 controllers apply to all of the following access points, EXCEPT:
NSE8 dumps Answer: D
Extended VLANs are configured by marking a VLAN on an AP or RFS controller as extended. Which of the following are methods by which extended VLAN configurations may be pushed to access points (select TWO)?
A. DHCP options
B. RF domain profile
C. Policy refresh
D. Device profiles
E. Manual overrides
F. RF Domain updates
Answer: D, E
Which of the following interfaces are recommended to be used for local management of an RFS6000 or RFS7000?
A. Gigabyte Ethernet (GE)
B. Management Ethernet (ME)
C. Uplink (UP)
D. Universal Serial Bus (USB)
NSE8 pdf Answer: B
You have configured a Motorola RFS controller with multiple VLANs. You have configured the native VLAN as VLAN 6, management traffic to use VLAN 8, voice traffic to flow over VLAN 18, and guest Internet access as VLAN 21. On which VLAN will untagged frames be placed after they arrive at the controller?
A. VLAN 1
B. VLAN 6
C. VLAN 8
D. VLAN 18
E. VLAN 21
During the deployment of a WLAN, the use of specialized helper applications is indispensible. These hardware components and computer programs allow the deployment engineer to visualize the invisible energy patterns that compose the RF channels. Which of the following best describes a specialized application that allows the deployment engineer to gather OSI Model Layer 1 and Layer 2 activity, in real time, and model the combined effects, superimposed on a representative background image?
A. Protocol Analyzer
B. Spectrum Analyzer
C. WLAN Discovery tool
D. Manual Site Survey tool
E. Predictive Site Survey tool
NSE8 vce Answer: D
Fortinet NSE8 dumps is assessable without paying any amount and soon after the payment you get the practice test software with 90 days free updates and the right to get the money back remain reserves for you unless you pass the https://www.pass4itsure.com/nse8.html dumps exam.
Read More Youtube:https://youtu.be/7bcg4paIqdA