The latest 200-301 Dumps contains 1297 exam questions and answers, which are edited, reviewed, modified, and verified by the Cisco 200-301 professional team. The guaranteed coverage rate exceeds 90%, which is the real best exam solution.
Lead4Pass updates Cisco CCNA Exam Solutions throughout the year! Make sure the 200-301 dumps you download are up-to-date every time!
more importantly! Download Cisco 200-301 Dumps: https://www.pass4itsure.com/200-301.html Enjoy 365 days of free updates!
Moreover, Lead4Pass 200-301 dumps provide PDF and VCE two learning formats, which you can choose according to your usage habits! Help you learn easily and pass the Cisco CCNA certification exam easily.
Sharing some of the latest 200-301 Dumps exam questions:
| From | Number of exam questions | Online download | Type |
| Pass4itsure | 13 | 200-301 PDF | Exam questions and answers |
QUESTION 1:
DRAG DROP
Drag and drop the application protocols from the left onto the transport protocols that are used on the right.
Select and Place:
Correct Answer:
QUESTION 2:
A hospital network needs to upgrade its Cisco FMC-managed devices and needs to ensure that a disaster recovery process is in place. What must be done in order to minimize downtime on the network?
A. Configure a second circuit to an ISP for added redundancy.
B. Keep a copy of the current configuration to use as a backup.
C. Configure the Cisco FMCs for failover.
D. Configure the Cisco FMC-managed devices for clustering.
Correct Answer: C
QUESTION 3:
Refer to the exhibit.
How must router A be configured so that it only sends Cisco Discovery Protocol Information to router C?
A. #config t Router A(config)#cdp run Router A(config)#interface gi0/0/0 Router A(config-if)#no cdp enable
B. #config t Router A(config)#cdp run Router A(config)#interface gi0/0/0 Router A(config-if)#cdp enable
C. #config t Router A(config)#cdp run Router A(config)#interface gi0/0/1 Router A(config-if)#cdp enable
D. #config t Router A(config)#no cdp run Router A(config)#interface gi0/0/1 Router A(config-if)#cdp enable
Correct Answer: A
QUESTION 4:
Refer to the exhibit. Which two prefixes are included in this routing table entry? (Choose two.)
R2#show ip route 192.168.1.0/26 is directly connected, FastEthernet0/1
A. 192.168.1.17
B. 192.168.1.61
C. 192.168.1.64
D. 192.168.1.127
E. 192.168.1.254
Correct Answer: BC
QUESTION 5:
Refer to the exhibit. Routers R1 and R3 have the default configuration The router R2 priority is set to 99
Which commands on R3 configure it as the DR in the 10.0 4.0/24 network?
A. R3(config)#interface Gig0/1 R3(config-if)#ip ospf priority 100
B. R3(config)#interface Gig0/0 R3(config-if)#ip ospf priority 100
C. R3(config)#interface Gig0/0 R3(config-if)i=ip ospf priority 1
D. R3(config)#interface Gig0/1 R3(config-if)#ip ospf priority 0
Correct Answer: B
QUESTION 6:
Refer to the exhibit.
The network engineer is configuring a new WLAN and is told to use a setup password for authentication instead of the RADIUS servers. Which additional set of tasks must the engineer perform to complete the configuration?
A. Disable PMF Enable PSK Enable 802.1x
B. Select WPA Policy Enable CCKM Enable PSK
C. Select WPA Policy Select WPA2 Policy Enable FT PSK
D. Select WPA2 Policy Disable PMF Enable PSK
Correct Answer: D
QUESTION 7:
Refer to the exhibit.
An engineer is updating the management access configuration of switch SW1 to allow secured, encrypted remote configuration. Which two commands or command sequences must the engineer apply to the switch? (Choose two.)
A. SW1(config)#enable secret ccnaTest123
B. SW1(config)#username NEW secret R3mote123
C. SW1(config)#line vty 0 15 SW1(config-line)#transport input ssh
D. SW1(config)# crypto key generate rsa
E. SW1(config)# interface f0/1 SW1(config-if)# switchport mode trunk
Correct Answer: CD
QUESTION 8:
Refer to the exhibit. Which two commands must be configured on router R1 to enable the router to accept secure remote-access connections? (Choose two)
A. transport input telnet
B. crypto key generates rsa
C. ip ssh pub key-chain
D. login console
E. username cisco password 0 cisco
Correct Answer: BE
QUESTION 9:
What is the reason to configure a trunk port that connects to a WLC distribution port?
A. Eliminate redundancy with a link failure in the data path.
B. Allow multiple VLANs to be used in the data path.
C. Provide redundancy if there is a link failure for out-of-band management.
D. Permit multiple VLANs to provide out-of-band management.
Correct Answer: D
QUESTION 10:
Refer to the exhibit.
Which password must an engineer use to enter the enable mode?
A. adminadmin123
B. cisco123
C. default
D. testing1234
Correct Answer: D
If neither the enable password command nor the enable secret command is configured, and if there is a line password configured for the console, the console line password serves as the enable password for all VTY sessions -> The “enable secret” will be used first if available, then “enable password” and line password.
QUESTION 11:
Why would an administrator choose to implement an automated network management solution?
A. to reduce operational costs
B. to support simpler password policies
C. to enable “box by box” configuration and deployment
D. to limit recurrent management costs
Correct Answer: A
QUESTION 12:
Refer to the exhibit. Which two configurations must the engineer apply on this network so that R1 becomes the DR? (Choose two.)
A. R1(config)#router ospf 1 R1(config-router)#router-id 192.168.100.1
B. R1(config)#interface fastethernet 0/0 R1(config-if)#ip ospf priority 200
C. R3(config)#interface fastethernet 0/0 R3(config-if)#ip ospf priority 0
D. R1(config)#interface fastethernet 0/0 R1(config-if)#ip ospf priority 0
E. R3(config)#interface fastethernet 0/0 R3(config-if)#ip ospf priority 200
Correct Answer: BC
QUESTION 13:
Which command must you enter to configure a DHCP relay?
A. ip helper-address
B. ip address dhcp
C. ip dhcp relay
D. ip dhcp poo
Correct Answer: A
…
Practice the latest 200-301 Dumps exam questions online to help you learn more about the latest Cisco CCNA certification exam! Improve professional skills!
Use Cisco CCNA Exam Solutions: Download Latest 200-301 dumps: https://www.pass4itsure.com/200-301.html (PDF+VCE), to help you pass the exam 100% successfully.
