Cisco 642-384 Exam Questions, Money Back Guarantee Cisco 642-384 Practice With The Knowledge And Skills

[The Newest Dumps] Real Cisco 642-384 exam dumps revised by experts, they were updated with the change of the Software Certifications CSQA,covering all the whole aspects of Cisco 642-384 exam. Just have a training of Flydumps Cisco https://www.pass4itsure.com/642-384.html exam questions to guarantee your 100% pass.

QUESTION 48
What is the primary purpose of SMB Smart Designs?
A. assists in locating appropriate resources
B. provides validated commercial solutions
C. provides training on products, tools, and solutions
D. provides a direct support path for any partner issue
E. provides a step-by-step outline of implementation tasks required

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 49
Which of these is the best definition of the Cisco Lifecycle Services approach?
A. It defines the minimum set of services required to successfully deploy and operate a set of Cisco technologies
B. It determines how best to price Cisco products
C. It provides partners with a useful way to leverage Cisco resources PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384
D. It consists of these phase: plan, deploy, support, and troubleshoot

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 50
How are lightweight access points different than autonomous access points?
A. Lightweight access points are managed individually
B. Lightweight access points are B, G, N capable
C. Lightweight access points require external antennas
D. Lightweight access points require a WLAN controller

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 51
Before installing Cisco ASDM, it is important to allow connectivity on the side interface of which device?
A. ISR
B. WLC
C. ASA
D. Cisco Security MARS

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 52
Which two are characteristics of HSSI cables? (Choose two)
A. HSSI cables use a female, 10-pin, SCSI-II-type connector
B. The HSSI connector and the HSSI cable are identical
C. HSSI cables use cable CAB-HSI 1 and cable CAB-HNUL
D. The HSSI connector and the HSSI cable are similar
E. The CAB-HUNL is used to connect your router to an external DSU

Correct Answer: CD Section: (none) Explanation
Explanation/Reference: QUESTION 53
Which statement best describes clustering in a small-business wireless network?
A. automatically configures wireless client devices via Wi-Fi Protected Setup
B. can get real-time traffic or bandwidth statistics form an access point within a cluster
C. replicates configuration parameters across access points in the cluster, while optimizing network performance
D. allows multiple access points to be connected wirelessly, without the need for a wired Ethernet network PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 54
What are two uses for USB ports on ISRs? (Choose two)
A. increased memory capabilities
B. secure device authentication
C. bulk flash storage
D. control over the types of files that can be stored
E. digital certificate storage

Correct Answer: BC Section: (none) Explanation
Explanation/Reference:
QUESTION 55
When troubleshooting poor network performance, which two symptoms would typically be associated with a network layer problem? (Choose two)
A. Packet loss is more than 30 percent
B. There is excessive broadcast traffic
C. There are excessive CRC errors
D. Pings succeed only part of the time
E. Slips are detected on WAN interfaces
F. ARP requests are timing out

Correct Answer: AD Section: (none) Explanation
Explanation/Reference:
QUESTION 56
Which screen on the Cisco ASDM home page would you use to see which access list rules are in effect?
A. NAT
B. Interfaces
C. Routing
D. Security Policy

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 57
Which type of antenna is used when coverage in all directions is required?
A. directional
B. bidirectional
C. ornnidirectional PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384
D. patch

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 58
Which service should be disabled or filtered via a firewall because an attacker could use the service to download a copy of Cisco IOS software from a router (thereby making the router vulnerable to DOC attacks)?
A. PAD service
B. finger service
C. TCP/UDP
D. BOOTP

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 59
Which two statement best describe the wireless core feature set using autonomous access points when implementing Wireless Domain Services? (Choose two)
A. Layer 2 and Layer 3 services can be configured in a Cisco Aironet autonomous AP or a Cisco Integrated Services Router
B. Layer 2 services can be configured in a Cisco Aironet autonomous AP or a Cisco Integrated Services Router
C. Layer 2 and Layer 3 services can be configured in a Cisco Aironet autonomous AP or controllers
D. Layer 3 services can be configured in WLSM
E. Layer 3 services can be configured in WLSE

Correct Answer: BD Section: (none) Explanation Explanation/Reference:
QUESTION 60
Refer to the exhibit. Switches A and C are running PVST+ STP, and switch B is running 802.1Q STP, if the BPDU of the root in VLAN 1 is better than the BPDU of the root in VLAN 2, then there is no blocking port in the VLAN 2 topology.The BPDU of VLAN 2 never makes a full circle around the topology, it is replaced by the VLAN 1 BPDU on the B_C link,because B runs only one STP merged with VLAN ! STP of PVST+ Thus, there is a forwarding loop What does PVST+ do to correct this?
A. Switch A sends PVST+BPDUs of VLAN 2 (to the SSTP address that is flooded by switch B) towards Switch C. Switch C will put port C-B into a type-inconsistent, which prevents the loop
B. Switch B sends PVST+BPDUs of VLAN 1 (to the SSTP address that is flooded by switch A) towards Switch C. Switch C will put port C-B into a type-inconsistent, which prevents the loop PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384
C. Switch C sends PVST+BPDUs of VLAN 2 (to the SSTP address that is flooded by switch B) towards Switch C. Switch C will put port C-B into a type-inconsistent, which prevents the loop
D. Switch A sends PVST+BPDUs of VLAN 1 (to the SSTP address that is flooded by switch B) towards Switch B. Switch A will put port C-B into a type-inconsistent, which prevents the loop

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 61
What is used to prevent outside resources from accessing private information within the company?
A. IPsec
B. VPN
C. PIN
D. Firewalls

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 62
Which type of security allows visibility into the state of the operating system and is the only way to inspect encrypted traffic?
A. zero updated architecture
B. network-based security
C. endpoint-based security
D. ACLs

Correct Answer: B Section: (none) Explanation
Explanation/Reference: QUESTION 63
Which two benefits will a client see from adding a Wireless LAN Controller to their Smart Business Communications System? (Choose two)
A. allow for guest access
B. increase connection speeds
C. add additional access points
D. network management with CLI

Correct Answer: AC Section: (none) Explanation
Explanation/Reference:
QUESTION 64
To avoid carrying every length of cable, lighting arrestors, and splitters when performing site
PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384
surveys, engineers can outfit their survey kits with which item?
A. Category 5 cable
B. RP-TNC plug
C. antenna attenuator
D. RP-TNC connector

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 65
Which two are components of AAA? (Choose two)
A. access control lists
B. Cisco IOS Software
C. Cisco Secure Access Control Server
D. Security Audit wizard
E. network access server

Correct Answer: CE Section: (none) Explanation
Explanation/Reference:
QUESTION 66
Which three business requirements development activities are performed in the prepare phase before creating a technology strategy? (Choose three)
A. identifying and assessing customer business requirements
B. documenting and categorizing customer business requirements in terms of performance, availability, capacity, and security
C. producing a documented technology strategy
D. creating a bill of materials
E. presenting documented business requirements to a customer and having the customer validate them
F. completing a site survey

Correct Answer: ABE Section: (none) Explanation
Explanation/Reference:
QUESTION 67
Which port-sales SMART Design documents are available to help you better serve your customers? (Choose three)
A. Design Guide
B. Small Business Product Guide
C. Implementation Guide
D. Solution Profile
E. Cisco Configuration Assistant
F. Application Notes PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384

Correct Answer: ACF Section: (none) Explanation
Explanation/Reference:
QUESTION 68
Which type of VPN is deal for employees who use a home PC or public computer to access the network?
A. IP sec emote access VPN
B. mobile VPN
C. dialup 0ffload VPN
D. SSL VPN
E. GET VPN

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 69
Which benefit can be obtained by using the change management service component in the operate phase?
A. reduced operating costs, due to consistent framework for making necessary changes in an efficient and accountable manner
B. greater accuracy, completeness, and timeliness of network configuration information
C. notification provided to interested parties regarding problems that have been identified, and a system that scales with customer requirements
D. improved system service quality and fewer disruptions

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 70
Refer to the exhibit. The tables contain information from the Cisco Configuration Professional
configurations of Router A and Router B. Traffic between Host 1 and Host 2 is not successfully establishing
the site-to-site VPN between Router A and Router B.
What is the mostly likely cause of this fault?

A. Router A is using a standard IP ACL (100-149) while Router B is using a Turbo ACL (150199)
B. The IKE encryption methods on the two routers are different
C. The IPSec policy map names on the two routers are different
D. The IPSec rules on the two routers are not permitting the correct interesting traffic

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 71
Which benefit can be obtained by using the change management service component in the
PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384
operate phase?
A. reduced operating costs, due to a consistent framework for making necessary changes in an efficient and accountable manner
B. greater accuracy, completeness, and timeliness of network configuration information
C. notification provided to interested parties regarding problems that have been identified, and a system that scales with customer requirements
D. improved system service quality and fewer disruptions

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 72
Which statement correctly describes configuration of the VPN server?
A. It requires definition of a Group ID for remote clients.
B. It requires configuration of port settings for the VPN server on the Cisco UC520.
C. It uses a preshared key for remote device authentication.
D. The WAN interface is preselected.

Correct Answer: C Section: (none) Explanation Explanation/Reference:
QUESTION 73
Which two benefits will a client see from adding a Wireless LAN Controller to their Smart Business Communications System? (Choose two.)
A. allow for guest access
B. increase connection speeds
C. add additional access points
D. network management with CLI

Correct Answer: AC Section: (none) Explanation
Explanation/Reference:
QUESTION 74
In which of these phases is a customer’s current network infrastructure assessed?
A. plan
B. design
C. implement
D. prepare

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 75
Which dial plan scenario may require PSTN trunks for outbound calls?
PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384
A. All the employees, the auto attendant or receptionist, and the voice-mail system have direct inward dial numbers using analog trunks.
B. A subset of the employees, the auto attendant or receptionist, and the voice-mail system have direct inward dial numbers, and the remaining employees do not have direct inward dial numbers.
C. All the employees, the auto attendant or receptionist, and the voice-mail system have direct inward dial numbers using digital interfaces.

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 76
Which two are benefits of installing Cisco Monitor Director at an SMB site for the partner selling the solution? (Choose two.)
A. simplifies Smart Business Communications System installation
B. allows the end customer to get free software updates
C. monthly recurring revenue model
D. automated monthly reporting on system performance

Correct Answer: CD Section: (none) Explanation
Explanation/Reference:
QUESTION 77
Which three business requirements development activities are performed in the prepare phase before creating a technology strategy? (Choose three.)
A. identifying and assessing customer business requirements
B. documenting and categorizing customer business requirements in terms of performance, availability, capacity, and security
C. producing a documented technology strategy
D. creating a bill of materials
E. presenting documented business requirements to a customer and having the customer validate them
F. completing a site survey

Correct Answer: ABE Section: (none) Explanation
Explanation/Reference:
QUESTION 78
After configuring VTP, you no longer receive updates as expected. Which command can you use to verify the number of VTP advertisements being transmitted?
A. show vtp database
B. show vtp counters
C. show vtp statistics PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384
D. show vtp status

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 79
Which design phase service component includes the development and documentation of the test case or cases used to verify that a deployed infrastructure meets operational, functional, and interface requirements?
A. Implementation Plan
B. Business Plan
C. Staging Plan
D. Detailed Design Development
E. Systems Acceptance Test Plan Development
Correct Answer: E Section: (none) Explanation

Explanation/Reference:
QUESTION 80
In which of these phases is a customer’s network assessed to determine its system readiness?
A. plan
B. design
C. operate
D. implement

Correct Answer: A Section: (none) Explanation
Explanation/Reference:
QUESTION 81
A concern has been expressed that the switched infrastructure in an integrated network is vulnerable to VLAN hopping attacks. Which two configuration statements can be used to mitigate VLAN hopping? (Choose two.)
A. switchport port-security
B. switchport port-security tagging
C. switchport access vlan
D. switchport double-tag snooping
E. switchport mode access

Correct Answer: CE Section: (none) Explanation
Explanation/Reference:
QUESTION 82
You are troubleshooting OSPF neighbor establishment problems, which are occurring over Frame Relay interfaces that use the default OSPF network type. What should you verify in the
PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384
router configuration?
A. the ip ospf network point-to-point statement under the Frame Relay interface
B. the ip ospf priority 0 statement on the Frame Relay interface on the designated router
C. the neighbor statements on the Frame Relay interface
D. the frame-relay map statement on the Frame Relay interface

Correct Answer: D Section: (none) Explanation
Explanation/Reference: QUESTION 83
Which two statements best describe the wireless core feature set using autonomous access points when implementing repeater topology? (Choose two.)
A. RF overlap between access points should be 10 to 15 percent with unique channels configured.
B. RF overlap between primary and repeater access points should be 10 to 15 percent with the same channel configured.
C. RF overlap between primary and repeater access points should be 50 percent with the same channel configured.
D. RF overlap between primary and repeater access points should be 50 percent with unique channels configured.
E. Clients that are associated with the repeater access point will have 10 to 15 percent less data throughput than clients that are associated with the primary root access point.
F. Clients that are associated with the repeater access point will have 50 percent less data throughput than clients that are associated with the primary root access point.

Correct Answer: CF Section: (none) Explanation
Explanation/Reference:
QUESTION 84
Refer to the exhibit. The tables contain information from the Cisco Router and Security Device Manager configuration of R A and R B. Traffic between Host 1 and Host 2 is not successfully establishing the site-to-site VPN between R A and R B. What is the mostly likely cause of this fault?
PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384

A. The IPSec and IKE encryption methods do not match. They all have to be either 3DES or AES.
B. R A is using a standard IP ACL (100-149) while R B is using a turbo ACL (150-199).
C. The D-H Group settings on the two routers are set to group 2. They must be set to group 1 for SHA-1.
D. The IPSec policy map names on the two routers do not match. They must be the same on both routers.
E. The IPSec rules on the two routers are not permitting the correct interesting traffic.

Correct Answer: E Section: (none) Explanation
Explanation/Reference:
QUESTION 85
Which two statements best describe the wireless implementation of Cisco Aironet root and non-root bridging? (Choose two.)
A. Point-to-point access points can be used if one is root and the other is non-root.
B. WGB can be used with an access point if the distance is less than one mile.
C. Root mode must be enabled only on one side in a point-to-point link to interoperate with other vendors and comply with 802.11.
D. Up to 17 non-root bridges can associate to a root bridge.
E. Point-to-point WGB can be used if total number of PCs is fewer than eight. PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384

Correct Answer: BD Section: (none) Explanation
Explanation/Reference:
QUESTION 86
The customer wants to implement wireless security through implementation of WPAv2. Which component of WPAv2 would limit the rollout because of the continued use of old access points?
A. 48-bit IV
B. AES
C. TKIP
D. MIC

Correct Answer: B Section: (none) Explanation
Explanation/Reference:
QUESTION 87
Which two statements are correct about using Cisco Router and Security Device Manager (SDM) to configure the OSPF routing protocol? (Choose two.)
A. Cisco SDM enforces the creation of area 0 when configuring OSPF.
B. Cisco SDM will use the supplied wildcard mask to exclude the host bits from the configured network address.
C. Cisco SDM allows the configuration of an area range to allow route summarization between OSPF areas.
D. Cisco SDM allows the selection of OSPFv1 or OSPFv2.
E. Cisco SDM allows the configuration of passive interfaces.

Correct Answer: BE Section: (none) Explanation
Explanation/Reference:
QUESTION 88
Which two features are only supported when using the Cisco Router and Security Device Manager (SDM) Advanced Firewall wizard and not supported when using the Cisco SDM Basic Firewall wizard? (Choose two.)
A. deep-packet inspections
B. IP unicast Reverse Path Forwarding on the outside (untrusted) interface
C. DMZ services
D. custom inspection rules
E. proxy authentication

Correct Answer: CD Section: (none) Explanation
Explanation/Reference:
QUESTION 89
Which command can be used to verify that RIPv2 is running on a router?
PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384
A. show startup-config
B. show ip route
C. show ip route rip
D. show ip protocols

Correct Answer: D Section: (none) Explanation
Explanation/Reference:
QUESTION 90
You have just configured and enabled the Cisco IOS Firewall feature set from a remote location using the Cisco Router and Security Device Manager (SDM) Firewall wizard. You later want to double-check your configuration using Cisco SDM. However, you find that you can no longer connect to the Cisco IOS Firewall using Cisco SDM. What is the probable cause of this failure?
A. You must additionally specify the Cisco SDM management port number to gain access when the configuration has been applied.
B. You have not generated an RSA key pair between the host and device to allow secure access via Cisco SDM.
C. You have been locked out via access lists that have been applied to the router as a result of your Cisco SDM configuration.
D. You must specify the host IP address of Cisco SDM in the Configuration panel for allowed management connections.

Correct Answer: C Section: (none) Explanation
Explanation/Reference:
QUESTION 91
Refer to the exhibit. A host on the Sales subnet (10.0.2.0/24) is not able to initiate a web connection to an outside website. According to the network diagram and partial Cisco Adaptive Security Device Manager configuration shown in the exhibit, what is the cause of the problem?
PassGuide.com-Make You Succeed To Pass IT Exams PassGuide 642-384

A. The dynamic NAT global pool is not configured correctly.
B. The source networks for static NAT are not configured correctly.
C. The administrator has not added an access list to allow the connection.
D. The source network for dynamic NAT is not configured correctly.

Correct Answer: D Section: (none) Explanation
Explanation/Reference:

Each Answers in Cisco https://www.pass4itsure.com/642-384.html study guides are checked by the concerned professional to provide you the best quality dumps. If you are looking to get certified in short possible time, you will never find quality product than Flydumps.com.

Author: markrandom